The Agilent HS-16 oil diffusion pump is a pump with high throughput and high pumping speed of 6000 L/s.

With its fully optimized vapor jet, the robust boiler design and the thermal protection switches the pump will run without any maintenance for many years.

It is available with 16 in. ASA or ISO 500K inlet flange.

This pump is a perfect fit for industrial applications such as vacuum furnace, heat treatment, metallizing, and coating processes for optical lenses, electronics and protective film layers.

 

 

 

 

Features

---

 

• -Fill and drain assembly allows for easy maintenance of pump fluid
• -Five-stage fractionating jet purifies pumping fluid for cleaner operation
• -Stable and reliable performance under widely varying operation conditions
• -Foreline baffle prevents loss of fluid into backing pump system
• -Fluid-level sight glass provides quick indication of pump fluid status at all times
• -High forepressure tolerance
• -Low ultimate pressure
• -Robust boiler design
• -High throughput with high pumping speed

 

 

 

Information

---

 

 

Backstreaming Rate	1.5 x 10-3 mg/cm²/min
Cooldown Time	30 min
Electrical Requirements	3 ph 50/60 Hz 240/415/480 V
Fluid Charge	2839 CC
Fluid Type	Oil
Input Voltage	208, 240, 380, 400, 415, 460, 480, 575 V
Maximum Forepressure - Full Load	0.55 Torr 0.72 mbar
Maximum Forepressure - No Load	0.65 Torr 0.85 mbar
Maximum Throughput	9.5 T-L/s (11.7 mbar-L/s) at 8100 W
Operating Range	2 x 10-3 to <5 x 10-8 Torr 1.3 x 10-3 to <6.5 x 10-8 mbar
Pump Weight	500 lbs 227 kg
Pumping Speed - Air	6000 L/s
Pumping Speed - Air, via AVS 4.1 (1963)	10000 L/s
Pumping Speed - He/H2	7500 L/s
Recommended Backing Pump	≥ 80 cfm (136 m3/hr)
Warmup Time	30 min
Water Connections	1/4 inch FPT
Water Cooling - Temperature Requirement	60-80 °F 15-26 °C
Water Cooling Flow Requirement	1.5 gpm 300 L/hr